BAND HEATER SPECIALISTS
 
Bnad heater hotline

+91-22-2920 5150
+91-22-2920 5151

sales@vinman.in
 
  Vinman Industries - Home Vinman Company Profile Vinman Range Products Vinman International Exports Order Online Enquiry Contact Us  
 
  Mica Band Heaters
  Ceramic Band Heaters
  Mica Nozzle Heaters
  Mica Strip Heaters
 
 
  Click Here to refer this Site
to a Friend / Colleague
 
 
 
Ceramic Band Heaters
 
    When ordering Ceramic Band Heaters please specify the following.
 
 

Quantity

  
 
Inside diameter and width
 

Volts

 
  Note:  
 
All Heaters designed in 230 volts AC, unless specified.
Voltage will be half in case of two piece construction, unless specified.
In case of 2 piece construction please specify voltage in both piece.
 
 

Watts

 
  Note:  
 
Maximum suggested wattage calculated on basis of 35 Watt /Sq In
For special wattage please contact us.
In case of 2 piece construction please specify wattage in both piece.
 
  Construction Style  
 
Single Piece
Two Piece
  Limitation : Min ID – 4” min, width – 1”, Max ID 44”
 
  Construction Type  
 
   
   
 
  Terminal Type  
 
     
Chrome Nickel SteelTerminal Box   Steel screw terminals   Male Plug (2 pin)  
Screw Post terminals
 
  Terminal Location  
 
Single Piece
Two Piece
 
  Note : In all the cases Terminal Location will be at 180°C opposite to clamping unless specified.  
 

Special holes or cut outs (please provide drawing of hole location.)

 
  IMP : In case of thermocouple holes, mounting holes, “U” slots  & cut outs (if any) please provide dimensional sketch.  
 

Thermocouple location

 
 
Single Piece
Two Piece
 
 

Clamping

 
 
Allen Key Barrel Nut Std. Size M6 x 45mm
 
  Common Construction parameters for all Mica Band Heaters  
 
Electric Terminal Connections will be Provided with Chrome Nickel Steel protection caps at center of width
  either at 180 Deg opposite the Clamping or 90 deg from Clamping, unless specified.
All Thermocouple Holes for Band Heaters (if required) will be Provided at center of width either at 180 Deg
  opposite the Clamping or 90 deg from Clamping. unless specified.
All Band Heaters above Dia 75mm will be provided with Screw Stud Electric terminal connections covered
  with Chrome Nickel Steel Protection Caps.
All Ceramic Band Heaters Below 75mm Dia will have Direct cable terminal along with SS protection cap.
Tolerance: Diameter (-) 2mm; Length (+ / - ) 2mm ; Wattaqe (+/-) 5 %
 
 
 
 
 
  Copyright © Vinman Industries 2009. All Rights Reserved. Add Vinman.in To Your Favourites   Follow Us On Follow Us On Facebook.com Follow Us On Twitter.com  
  Company Profile   |  Mica Nozzle Heaters   |  Ceramic Band Heaters  |  Mica Band Heaters  |   Mica Strip Heaters  |  Order Online  | Exports |  Contact Us   |   Site Map