BAND HEATER SPECIALISTS

BAND HEATERS

Bnad heater hotline

+91-22-2920 5150
+91-22-2920 5151

sales@vinman.in
 
  Vinman Industries - Home Vinman Company Profile Vinman Range Products Vinman International Exports Order Online Enquiry Contact Us  
 
  Mica Band Heaters
  Ceramic Band Heaters
  Mica Nozzle Heaters
  Mica Strip Heaters
 
 
  Click Here to refer this Site
to a Friend / Colleague
 
 
 
Mica NozzleHeaters
 
    When ordering Mica Nozzle Heaters please specify the following.
 
 

Quantity

 
 
Inside diameter and width
 

Volts

 
  Note:  
 
All Heaters designed in 230 volts AC, unless specified.
Voltage will be half in case of two piece construction, unless specified.
In case of 2 piece construction please specify voltage in both piece.
 
 

Watts

 
  Note:  
 
Maximum suggested wattage calculated on basis of 25 Watt /Sq In
For special wattage please contact us.
In case of 2 piece construction please specify wattage in both piece.
 
  Construction Style  
 
Single Piece
  Limitation : Min ID – 4” min, width – 4.5”
 
  Construction Type  
 
   
   
 
  Terminal Type  
 
screw post terminal with 10” long leads and Chrome Nickel Steel protection Box
2 pin Male Plug ( 19 amp)
As per sketch ( pls. email or send us sample)
 
  Terminal Location  
 
Single Piece
 
 

Special holes or cut outs (please provide drawing of hole location.)

 
  IMP : In case of thermocouple holes, mounting holes, “U” slots  & cut outs (if any) please provide dimensional sketch.  
 

Thermocouple location

 
 
Single Piece
 
 

Clamping

 
 
Barrel Nut M6 * 45 mm
Flange Lock ½’ height with M-5 x 25 bolt
 
  Common Construction parameters for all Mica Band Heaters  
 
Electric Terminal Connections will be Provided with Chrome Nickel Steel protection caps at center of width
  either at 180 Deg opposite the Clamping or 90 deg from Clamping, unless specified.
All Thermocouple Holes for Band Heaters (if required) will be Provided at center of width either at 180 Deg
  opposite the Clamping or 90 deg from Clamping. unless specified.
All Band Heaters above Dia 60mm will be provided with Screw Stud Electric terminal connections covered
  with Chrome Nickel Steel Protection Caps.
All Mica Band Heaters Below 60mm Dia will have Direct cable terminal along with Chrome Nickel Steel
  Protection Caps.
Nozzle Heaters below 40mm Dia will NOT have Protection Caps for Terminals, but have Direct cable
  terminals between the metal sleeve. (Refer to Drg.).
Tolerance: Diameter (-) 2mm; Length (+ / - ) 2mm ; Wattaqe (+/-) 5 %
 
 
 
 
 
  Copyright © Vinman Industries 2009. All Rights Reserved. Add Vinman.in To Your Favourites   Follow Us On Follow Us On Facebook.com Follow Us On Twitter.com  
  Company Profile   |  Mica Nozzle Heaters   |  Ceramic Band Heaters  |  Mica Band Heaters  |   Mica Strip Heaters  |  Order Online  | Exports |  Contact Us   |   Site Map